Essenthial 2.0 System
The Essenthial 2.0 project was born from the experience of those who daily perform in the scope of oral surgery and know first-hand the challenges that clinicians face daily in implant placement procedures.

These important factors are the starting point of our principles:
SIMPLE: Simplified surgical and prosthetic procedure
SAVING: Only few components, all of them inside the packaging.
ERGONOMIC: Essential and simplified surgical approach furthermore, all instruments have been designed to offer maximum ergonomic and easy to use. Therefore, Essenthial2.0 implant system is direct both beginners and expert clinicians in the eld of implantology.

The Dentha winning point take place in the figure of its creator, a dentist who has intertwined his high knowledge with decades of clinical experience and a bit of entrepreneurial spirit. A combined mix which has been transformed into a tangible new implant system: Essenthial2.0. By clinicians for clinicians, therefore this dental implant system has been designed with the aim to provide a simplified ed surgical and prosthetic procedure, to reduce chair-time and to achieve better aesthetic results.

Dentha offers also a restricted but, at the same time, versatile range of efficient tools and precision superstructures. These give the possibility to doctors to insert Essenthial2.0 implants also into jawbones partially or fully edentulous. Macro-shape of our implants has been designed to provide stability in all types of bone and at the same time, micro-shape greatly enhances osseointegration processes that unites bone to an implant surface.

Essenthial2.0 dental implants can be inserted following two-stage surgical protocol or one- stage technique and also using immediate loading procedure. The purpose is to reach primary and secondary stability of the implant to firmly sustain removable partial dentures and fixed dentures.

Severe control systems constantly verify all production steps, complying with European Regulation 93/42/ EEC, 2007/47/EC. Dentha has been certi ed in accordance with UNI CEI EN ISO 13485/2016 Quality Management System for Medical Devices. Products that appear in this catalogue are CE approved and are registered in the Italian Board of Health database.

Implants

A colour code system has been de ned in the Essen- thial2.0 implant system for identifying the intraosse- ous diameter of the implant. The nal drills and the sequence on the surgical tray (BOX_E1.0_RADEL) are also identi ed with the colour code. Essenthial2.0 dental implants are divided in four groups, depending on the diameter:
  • Essenthial 2.0 NARROW
    diameter 3.4 mm Length 8 - 10 - 11.5 - 13 - 15 mm
  • Essenthial 2.0 STANDARD
    diameter 3.8 mm Length 8 - 10 - 11.5 - 13 - 15 mm
  • Essenthial 2.0 STANDARD PLUS
    diameter 4.2 mm Length 8 - 10 - 11.5 - 13 - 15 mm
  • Essenthial 2.0 STANDARD WIDE
    diameter 4.6 mm Length 8 - 10 - 11.5 - 13 - 15 mm

Platform

NARROW Components are suitable only for:
  • Essenthial 2.0 NARROW
    diameter 3.4 mm
  • Essenthial 2.0 STANDARD PLUS
    diameter 4.2 mm
Components are compatible with the following implant lines:
  • Essenthial 2.0 STANDARD
    diameter 3.8 mm
  • Essenthial 2.0 STANDARD WIDE
    diameter 4.6 mm

The eight successful points of Essenthial 2.0

TRIPLE TAPER-SHAPE
In order to enhance a better primary stability also in different conditions of bone quality and quantity. Essenthial2.0 implant has been designed with a triple taper-shape: coronal, of implant body and of threads.

MACRO-THREAD BODY IMPLANT
The fixture apical portion is self-threading; double thread 180° shifted for a faster insertion and for increasing bone to implant contact (BIC). Furthermore, threads exhibit different depth and shape. In the coronal zone, there are square threads which have a compacting function, V-threads act as osteotome in the apical portion. Thanks to this special structure good primary stability is provided.

MICRO-THREADED NECK
Essenthila2.0 dental implant feature is the micro- thread neck instead of a common microgroove. This particularity helps to enhance primary stability and the thrust during implant insertion, especially in cases of low quantity of bone (4/5 mm of superior maxillary bone thus it is necessary a sinus lift).

CONICAL- HEX. INTERNAL CONNECTION
3,0 mm depth and 16° conical. The hexagonal part 1,6mm gives stability, the conical part 1,4mm is a sea to bacterial infiltrations.

PLATFORM SWITCHING
To improve soft and hard tissues stability.

CONICAL - HEX ENGAGE
There is a special connection between implant and prosthetic components thanks to different degrees of titanium. This combination guarantees:
- The friction between the 2 metal conical parts create a Cold Weld Seal at the top of the cone.
- Absence of infiltration of bacteria; it is important to limit the access of bacteria that may be dangerous for the per-implants tissues and inflammations.
- Reduction of Micro movements. Less vibration and functional stress.
- Long term stability for soft and hard tissues.
- Reduction of screw loosening.

ROUNDED APEX
Protection of the sinus floor. The implant has two apical cutting for a better penetration. They also give a major stability and ensure anti-rotation of the implant. Furthermore, they have a decompression function and pick up apical bone debris.

SURFACE TREATMENT
The surface of implant is treated both by acid etching, in order to guarantee a great morphological surface for osseointegration and also for a cleaner implant's treatment.
ESSENTHIAL 2.0 IMPLANT LINES
Implant with changeable modulation stability

NARROW Line Ø 3.4 mm

Internal CONICAL - HEX. CONNECTION Ø 2.10 mm with small platform. Into the packaging there is implant with abutment-mounter, connecting screw and covering screw. The Essenthial "light" line is supplied only with implant and covering screw. Instructions for use and guarantee labels are also included.
Implant with changeable modulation stability

STANDARD Line Ø 3.8 mm

Internal CONICAL - HEX. CONNECTION Ø 2.10 mm with small platform. Into the packaging there is implant with abutment-mounter, connecting screw and covering screw. The Essenthial "light" line is supplied only with implant and covering screw. Instructions for use and guarantee labels are also included.
Implant with changeable modulation stability

STANDARD PLUS Line Ø 4.2 mm

Internal CONICAL - HEX. CONNECTION Ø 2.40 mm with small platform. Into the packaging there is implant with abutment-mounter, connecting screw and covering screw. The Essenthial "light" line is supplied only with implant and covering screw. Instructions for use and guarantee labels are also included.
Implant with changeable modulation stability

STANDARD WIDE Line Ø 4.6 mm

Internal CONICAL - HEX. CONNECTION Ø 2.40 mm with small platform. Into the packaging there is implant with abutment-mounter, connecting screw and covering screw. The Essenthial "light" line is supplied only with implant and covering screw. Instructions for use and guarantee labels are also included.

Catalogue 2017
Certificates
IFU

Leave your details to download the catalogue 2017, discover now the Essenthial1.0. components, certificates and IFU.
Technical Assistance

+39 336 469 612
assistenza@denthaimplants.it
Sales Account 

+39 0461 764886
info@denthaimplants.it
DENTHA SRL

P.zza Montebello, 8, 38050
Roncegno Terme, ITALIA
Partner with